General Safety

!

• Carefully read this manual before using the instrument.
• Use the instrument according to these instructions only.
• Use the instruments only under environmental conditions and signal strength described in the technical data. There is no guaranty if you exceed the values your safety.
• The input voltage shall not exceed the values rated in the technical data.
• The power supply must be within the limits given in the technical data.
• Always make a visual inspection of connection equipment such as leads and clamps before use.
• Use fuses (500mA) if you connect the instrument directly to voltage where no fuse is available or a high short circuit impedance is given.

!

• For working on equipment under voltage use the guidelines given in EN50110.
• Also follow the 5 golden safety rules:
• Always switch off.
• Secure against reconnection.
• Test voltage for being switched off.
• Connect to earth and short circuit the cables.
• Protect voltage leading equipment in the neighborhood.

Warranty

The warranty for the instrument is 2 years - usual operating conditions preconditioned. 

Recycling

!

Am14 is an electronic instrument and must be recycled according to the WEEE directive. 
Do not throw away!

More information see:
http://ec.europa.eu/environment/waste/weee/index_en.htm

CE Conformity

This instrument is compliant with the CE requirements.

EMC Directive 2014/30/EU

Testprocedures:
IEC 61326:2013
IEC 61000-3-2:2014
IEC 61000-3-3:2013

Safety:
EN 61010-1:2010

RoHS Compliant

This product is compliant with the RoHS Directive.

For further informations see:
http://ec.europa.eu/environment/waste/rohs_eee/index_en.htm